ALT300 Smoke Leak Tester is designed for detecting the leakage of pipe systems, air intake system and cooling tank, which conforms to SAE standards. It’s a professional tool which can help you find leakage in any pipe system quickly.
Description
- Designed for detecting the leak of pipe systems in cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
- It can change special oil (baby oil or mineral oil) into smoke, and blow smoke into sealed pipe system. You can find out leak point in pipe via the smoke and fix it where leak exists.
- It can produce smoke fast with large volume, which can effectively help technician improve working efficiency.
Features
- Intake System Leak Test
- Exhausts System Test
- Fuel System Test
- Coolant Tank Test
- Turbo System Test Only
- Combustion Chamber Test
- Dual Mode (Smoke Mode & Air Mode)
- Built-in Air Pump
- For Various Motor Vehicles
Specification
- Voltage: DC12V (Optional AC100-240V Power supply)
- Current: 6A
- Pressure Range: 8-1.2 Bar
- Air Flow: 25 L/Min
- Oil Volume: 30 ML
- Oil Consumption: 0.5 ML/Min
- Test Hose Length: 2.5 M
- Power Cable Length: 2.0 M
How To Use
- Open the engine cover, and hang the main unit under the cover.
- Disconnect the pipe which needs to be connected with detector. If the pipe’s two sides need to be disconnected, please make sure the other side needs to blocked with a rubber stopple.
- Make sure this side with proper taper stopple/pipe, and connect it with smoke output tube.
- Connect the main unit with DC12V battery: Red with positive, Black with negative.
- Turn on the power switch, the main unit starts to work.
- In 2 minutes, the pipe will be filled with smoke. Check and find the leak points. Please use light or head lamp if necessary.
- After finding out leak location, then connect pipes or wires well.
Packing Lists
Main Unit *1
Smoke Output Tube *1
Power Cable *1
Taper Stopple *1
Universal Intake Adaptor *1
Oil Bottle *1
User Manual *1
